ASROCK H61M-S INTEL SATA RAID DRIVER DETAILS:
|File Size:||37.6 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
ASROCK H61M-S INTEL SATA RAID DRIVER
Gigabyte GA-H61M-S DDR3 Micro ATX Motherboard
Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the ASRock H61M-S Intel SATA RAID, please do not over-tighten the screws!
Doing so may damage the motherboard. Do not force to insert the CPU into the socket if above situation is found.
- ASROCK H61M-HVGS Installation guide
- Best solid state drives for desktop
- Additional information
Otherwise, the CPU will be seriously damaged. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.
Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.
Step 3. Insert the Pin CPU: Hold the CPU by the edges where are marked with black lines.
Raid 0 with SSD or no? Tom's Hardware Forum
Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.
Verify that the CPU is within the socket and properly mated to the orient keys. Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. Secure load lever with load plate tab under retention tab of load lever.
ASRock H61M-VS - Best Compatible ASRock H61M-VS Mobo
Below is an example to illustrate the installation of the heatsink for Pin CPU. Step 1.
H61M-S. Solid Capacitor for CPU Power; Supports Intel® K-Series CPU; Supports Dual Channel DDR3 6 USB4 SATA2; Supports ASRock XFast RAM, XFast LAN, XFast USB Technologies; Supports AXTU. 2 x SATA Data Cables.
Solid Capacitor for CPU Power; Supports Intel K-Series CPU; Supports Dual Channel DDR3 ; Supports Intel HD Graphics /; Graphics Output Options: D-Sub, DVI-D and HDMI; Supports ASRock XFast RAM 4 x SATA2 Gb/s connectors, support NCQ, AHCI and Hot Plug functions 2 x SATA Data Cables.