FOXCONN INFERNO KATANA GTI DRIVERS FOR PC

FOXCONN INFERNO KATANA GTI DRIVER DETAILS:

Type: Driver
File Name: foxconn_inferno_34552.zip
File Size: 37.5 MB
Rating:
4.56
9 (4.56)
Downloads: 12
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* (*Free Registration Required)

Download Now
FOXCONN INFERNO KATANA GTI DRIVER



Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

Align the card with the slot, and press down on the card until it is fully seated in the Foxconn Inferno Katana GTI. Make sure the metal contacts on the card are completely inserted into the slot. Secure the card's metal bracket to the chassis back panel with a screw.

FOXCONN INFERNO KATANA GTI WINDOWS 7 X64 DRIVER

After installing all expansion cards, replace the chassis cover. Turn on your computer. Install the driver provided with the expansion card in your operating system. Gently insert the graphics card into the PCI Express x16 slot. Make sure the graphics card is locked by the latch at the end of the PCI Express x16 slot. Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot. Carefully read Foxconn Inferno Katana GTI manual that came with your expansion card. Only plug one graphic card into any of them, it can work at 16X.

Plug two, they will work at 8X. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

Foxconn Inferno Katana GTI motherboard for PC Gaming by Foxconn

Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

Pin Definition Pin Definition 1 3. If you are using a pin power supply, you need to align the ATX power connector according to the picture. We recommend you using an 8-pin ATX 12V power supply.

Inferno Katana GTI

If you are using a 4-pin power supply, you need to align the ATX power connector according to the picture on the right. It indicates the active status of the hard disks.

  • Review:Foxconn Inferno Katana GTI Motherboard
  • Foxconn Inferno Katana GTI Motherboard DDR3 Memory RAM & SSDs
  • Foxconn Inferno Katana manual
  • 3 back panel connectors, Inferno katana, Inferno katana gti – Foxconn Inferno Katana User Manual
  • Accessories
  • [benchtech]Foxconn Inferno Katana GTI Preview

When the system is in operation S0 statusthe LED is on. Push this switch allows the system to be turned on and off rather than using the power supply button.

Foxconn P55 Inferno Katana Preview - Quantum Force is Back

These fans can be automatically turned off after the system enters 3, S4 and S5 sleeping states. It provides the Front Audio output choice. This section explains how to use the various functions of this motherboard by changing the jumper settings.

Users should read the following content carefully prior to modifying any jumper setting. Description of Jumpers 1. For any jumper on this motherboard, pin 1 can be identified by the bold silkscreen next to it.

FOXCONN INFERNO KATANA GTI DRIVER WINDOWS

The following table explains different types of the jumper settings. The shorting can also be done by touching two pins by a screwdriver Foxconn Inferno Katana GTI a few seconds, but using jumper cap is recommended. The steps to clear CMOS data are: Turn off the computer, unplug the power cord from the power outlet.

Foxconn BIOS Inferno Katana GTI Free Driver Download (Official)

Put Foxconn Inferno Katana GTI metal object such as a screwdriver onto pins to short them. This will clear CMOS data. After a few seconds, remove the metal object to leave the Pins open. Plug in the power cord to your computer and turn it on. RST Push the reset button to reboot the system. Intel® Core™ i7, Core™ i5, Core™ i3 processors, Socket LGA; Supports Intel® Turbo Boost and Hyper-Threading Foxconn Inferno Katana GTI Dual channel DDR3.

Foxconn Inferno Katana GTI - motherboard - ATX - LGA Socket - P55 overview and full product specs on CNET.

Other Drivers