Type: Driver
File Name:
File Size: 28.1 MB
11 (4.18)
Downloads: 8
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* (*Free Registration Required)

Download Now

Then I just connected the newly modified antenna to my Foscam mini -- presto -- instant Foscam compatible antenna for less Tenvis 319W Network Camera 5 bucks. The focal lengths appear to be the same on both; about 2cm - infinity. Given how my cam is mounted, I really needed to be able to turn off those LEDs manually.

Since there's no way to do that under each cam's current firmware version, I just taped off all the LEDs on both cams with electrical tape. I also taped off all visible markings and power indicators so the cams were just little black boxes with a lens. It just makes them more stealth, plus, where I mounted the cams Tenvis 319W Network Camera causing the IRs to just blow out the video to white, since the IRs were bouncing back into the lens. This is not a design flaw, it's just how things worked out with the way I needed the cams mounted.

Under normal conditions, the night vision works fine on both cams. I have plenty of external lighting outside the garage, so the IR LEDs just weren't necessary in my setup. The video from both cams look good at night, with or without the IRs functioning. But keep in mind, you will need a minimal source Tenvis 319W Network Camera light elsewhere, if you blackout the LEDs like I did.

I have 2 different Tenvis cams, and the software on both is very crude and rudimentary. It works fine, it just looks like it was programmed back in the 90's. Foscam's interface, however, is pleasing to the eye, well laid out, straightforward, and very easy to use. There's just no comparison; Foscam wins, hands-down.

TENVIS MINI319W Indoor Wireless IP Security Camera With

Foscam is about 2. Foscam actually has great quality mounts for all their standard PTZ cams, but the one for this mini version just wouldn't stay in place; the ball joint kept sliding one way or another and wouldn't stay put, no matter how hard I tightened it.

Just the weight of the cam alone was enough to make the mount drift out of alignment. In "System Update" section, click "Browse" and choose the firmware suitable for your camera. Click "Upgrade" and wait as the Tenvis 319W Network Camera carries out the upgrade process. Reboot the unit if required.

About Network Camera Firmware Update: However, bear in mind that applying an earlier build might not always be possible. As for the installation method, the steps vary depending on the model you Tenvis 319W Network Camera, but basically, you must connect your camera via an Ethernet cable username and password requiredand use the downloadable file in the Firmware Update section to upgrade your device. Remember that you also must" cycle In this instance, I couldn't face all of the above again, post-upgrade, so these notes are about a Tenvis MiniW, hardware version 2.


Go by a different route, and you get different information. Remember I said you should change the name and password for the administrator", but only save, say, 16 of the characters, but then refuse to let you in if you enter the 20 characters which you thought were the password.

Tenvis Miniw Manuals

I think that the first is for changing the password of the currently logged on user. In the second, you can good! Sadly, there's no fine grained control of permissions, but that's not essential. It looks like maybe Tenvis is thinking of adding that sometime in the future.


As ever, as is unavoidable, you must start the setup with a wired connection. For many of us, after getting in, and creating an admin user other than "admin", with a good password, the next step is setting up the wireless Tenvis 319W Network Camera. The device is capable of scanning for a wireless network to connect to.

Xtreamer Elvira Media PlayerTenvis Mini319W IP Camera
Samsung BD-J7500 Blu-ray PlayerApple Footer
MSI GX620 LANShop by category
Asus P8H77-V BIOS 0803Account Options

Detects the protection protocol. Didn't need to re-boot camera.


Welcome to TENVIS dowanload center where you can get the latest firmware or software updates. Only $,buy Tenvis Mini W Balck Wireless IP Camera (21 IR LEDs, Night Vision, Motion Detection, Two-Way Audio, AU Plug) at GearBest Store with.

Other Drivers