Type: Driver
File Name:
File Size: 37.9 MB
11 (3.55)
Downloads: 7
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* (*Free Registration Required)

Download Now

Please refer to our website for CPU support list. This motherboard supports Untied Overclocking Technology. Please read Untied Overclocking Technology on page 18 for details.

EZY Infotech d.o.o. - M-B AM3 Nvidia /nForcea

This motherboard supports Dual Channel Memory Technology. Before Asrock N68-S3 UCC SATA2 implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 11 for proper installation. If you want to adopt DDR3 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules. The maximum shared memory size is defined by the chipset vendor and is subject to change. Power Management for USB 2. English 7 English It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices Asrock N68-S3 UCC SATA2 get the best system performance under Windows environment.


ASRock website: Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. The voltage regulator can reduce the number of output phases to improve efficiency when the CPU cores are idle. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performance. Please visit our website for the operation procedures of Asrock N68-S3 UCC SATA2 Energy Saver.


Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility. It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings. Your friends then can load the OC Asrock N68-S3 UCC SATA2 to their own system to get the same OC settings as yours! Please be noticed that the OC profile can Asrock N68-S3 UCC SATA2 be shared and worked on the same motherboard.


Although this motherboard offers stepless control, it is not recommended to perform over-clocking. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it Asrock N68-S3 UCC SATA2 again.

Asrock N68-S3 UCC alaplap AM3 - 6 000 Ft

To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard Asrock N68-S3 UCC SATA2. Before you install or remove Asrock N68-S3 UCC SATA2 component, ensure that the power is switched off or the power cord is detached from the power supply. Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

Hold components by Asrock N68-S3 UCC SATA2 edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

English 9 2. Unlock the socket by lifting the lever up to a 90 o angle. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. Step 4. Asrock N68-S3 UCC SATA2

The lever clicks on the side tab to indicate that it is locked. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in Asrock N68-S3 UCC SATA2 contact with each other. For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.

Phenom II X6 6-Core CPU Ready; Supports UCC feature (Unlock CPU Core); 4 x SATA2 Gb/s connectors, support RAID Asrock N68-S3 UCC SATA2 0, RAID 1, RAID 0+1, RAID. NS3 UCC Supports UCC feature (Unlock CPU Core) 4 x SATA2 Gb / s connectors, support RAID (RAID 0, RAID 1, RAID 0+1, RAID 5 and JBOD).

Other Drivers