ASROCK FM2A55M-DGS R2.0 AMD GRAPHICS DRIVER DETAILS:
|File Size:||3.2 MB|
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* (*Free Registration Required)|
ASROCK FM2A55M-DGS R2.0 AMD GRAPHICS DRIVER
What is Hot Swap Function?
Please read below operation guide of Hot Plug feature carefully. Points of attention, before you process the Hot Plug: Please make sure the SATA2 driver is ASRock FM2A55M-DGS R2.0 AMD Graphics into system properly. The latest SATA2 driver is available on our support website: Please follow below instructions step by step to reduce the risk of HDD crash or data loss.
- AMD A @ MHz - CPU-Z VALIDATOR
- FM2A55M-DGS R and related drivers
- Best solid state drives for desktop
- Best solid state drives for desktop
- Инструкция для ASROCK FM2A55M-DGS R2.0
- AMD A4-5300 @ 3492.92 MHz
Points of attention, before you process the Hot Unplug: Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side ASRock FM2A55M-DGS R2.0 AMD Graphics install those required drivers.
ASRock FM2A55M-DGS R Quick Installation Guide - Page 11
Therefore, the drivers you install can work properly. Set up UEFI. Not only will it make BIOS setup less difficult but also a lot more amusing.
You may also restart by turning the system off and then back on. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. You can also navigate with a mouse. Please note that overclocking may cause damage to your components and ASRock FM2A55M-DGS R2.0 AMD Graphics. It should be done at your own risk and expense. Configuration options: The default value is [Auto].
The default value is [Disabled]. Please be noted that overclocking may reduce the D-Sub resolution and cause the display abnormal situation. Spread Spectrum This item should always be [Auto] for better system stability. The default value is [Enabled]. If [Enabled] ASRock FM2A55M-DGS R2.0 AMD Graphics selected, the power consumption is reduced when overclocking. However, it is recommended to keep the default value for system stability. Boost Frequency Multiplier For safety and system stability, it is not recommended to adjust the value of this item. CPU Frequency Multiplier For safety and system stability, it is not recommended to adjust the value of this item.
However, for safety and system stability, it is not recommended to adjust the value of this item. Bank Interleaving Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention. The ASRock FM2A55M-DGS R2.0 AMD Graphics is [Auto]. Setting wrong wrong values values in in this this section section may may cause cause Setting the system to malfunction.
Please note that enabling this function may reduce CPU voltage and memory frequency, and lead to system ASRock FM2A55M-DGS R2.0 AMD Graphics or compatibility issue with some memory modules or power supplies. Please set this item to [Disable] if above issue occurs. It allows you to select the type of Primary VGA in case of multiple video controllers.
The default value of this feature is [PCI Express]. Share Memory This allows you to set the share memory feature. Use this to enable or disable Dual Graphics feature. If you enable this option, the primary monitor will be onboard VGA. The default value of this option is [Disabled]. Hard Disk S. Use this item to ASRock FM2A55M-DGS R2.0 AMD Graphics or disable the S. Self-Monitoring, Analysis, and Reporting Technology feature. Serial Port Address Use this item to set the address for the onboard serial port. Parallel Port Use this item to enable or disable the onboard parallel port.
Fm2a55m Dgs r2.0
Device Mode Use this ASRock FM2A55M-DGS R2.0 AMD Graphics to change the Printer Port mode. Select [Auto] will enable this feature if the OS supports it. Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows certification. There are four confi guration options: Please refer to below descriptions for the details of these four options:Supports AMD Dual Graphics. Connector.
- 6 x SATA2 Gb/s connectors, support RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI and Hot Plug functions. FM2A55M-DGS R Support for Integrated AMD Radeon HD series graphics in A-series APU - DirectX ASRock OMG (Online Management Guard).